Shandong Tengfei Mechanical and Electrical Technology Co., Ltd
located at the foot of the famous Mountain Tai, our company near
the Beijing to Shanghai high-speed, Beijing to Fuzhou High-speed,
104 State Road. We are a integrated science and technology
joint-stock enterprises, and we can design,manufacture
, install,commission gypsum board and gypsum powder and
gypsum block machine ourselves. At present, our company
have the ability to design and manufacture gypsum board
production line with annual capacity from 2 Million M2 to
50 Million M2, gypsum block plant with annual
capacity from 100,000 M2 to 1.5 Million M2, gypsum
powder production line and phosphogypsum powder
production line and FGD gypsum powder production
line and fluorine gypsum powder production line
with annual capacity from 30,000 tons to 500,000
tons, and we also can produce PVC laminated
gypsum board equipment and gypsum
board light frame equipment.
We can guarantee the quality and 100% successful commission.
1. Dosing system
Consisting of water metering device, powder metering device, compressed air systems and chassis and other components.
2. Mixer
Consisting of the mixer rack, stainless steel mixing tank, stainless steel openable top cover, the water pipe installed on the roof, stirrer and pouring cylinder which are equiped with with motor, etc.
3. Forming machine
The mold material adopts alloy steel that is electroplated with thick enough hard chrome on its surface and is mirror-polished. Then with high manufacturing accuracy and a fine adjustment structure of block dimensions to make sure all the blocks produced are of high precision, excellent surface finish, and also long life-span of the mold.
4. Central hydraulic station
Including high and low pressure oil pump and drive motor, fuel tank (with oiler, liquid level indicator, hook, etc.), electromagnetic valve, one-way throttle valve,etc.
5. Pneumatic flexible fixture
Pneumatic flexible fixture-on-rails: install fixturing trolley with wheels on two rails. The trolley can move at high or low speed, advance and retreat, and has the functions of brake positioning.
6. Automatic control system
The system uses programmable logic controller (PLC), and is composed of a button box, an electric control cabinet and other devices near the operators.
1. The specification of the gypsum block
500 mm × 666mm ×60mm
500 mm × 666mm × 80mm
500 mm × 666mm × 100mm (solid, hollow) Hollow rate: 32%
2.The performance of the gypsum block(JC/T 698-1998 gypsum block)
Air noise prevention: 40.5 dB FRP Properties: 186 min Formation: ≤ 0.5 mm/m2 Fracture load: ≥ 4.0 Kn
3. The quality of the gypsum block
It can meet or exceed the "Gypsum block" standards requirements (JC / T 698-1998)
Production Automatic Controlling System
It adopts PLC control system. It can control the feeding machine, batching system, blender, molding machine, the central hydraulic station, pneumatic telescopic fixture, and other equipment according to the production requirements, it can guarantee the product quality and production efficiency.
Gypsum Block Introduction:
Gypsum is the main raw material of gypsum block, after mixing with water, then pour the slurry into shaper, after drying and then make light of the building gypsum products. You also can add the lightweight aggregate, fiber reinforced materials, foam and other supporting material in the production according to the performance requirements.
Gypsum Block Characteristics:
1. Gypsum block with light, precise size
2. Fireproof, thermal insulation, regulating indoor humidity
3. Excellent performance of the convenience
4. It is environmental protection, energy conservation, green product
Gypsum Block Application:
1. If uses frame and fixed structure, the wall can bear heavier loads, such as water heater etc.
2. The gypsum block can be used in the bathroom, toilet
Gypsum Block Specification
1. Length 666mm; High 500mm; Thickness 60mm-230mm
2. Three gypsum blocks are 1M2
Production Automatic Controlling System
It adopts PLC control system. It can control the feeding machine, batching system, blender, molding machine, the central hydraulic station, pneumatic telescopic fixture, and other equipment according to the production requirements, it can guarantee the product quality and production efficiency.
